Monday, November 10, 2008
Publications
Journal papers:
- Fadi M Alsaleem, Mohammad I Younis, and Hassen M Ouakd, "On the nonlinear resonances and dynamic pull-in of electrostatically actuated resonators" J. Micromech. Microeng. 19 (2009) 045013 doi:10.1088/0960-1317/19/4/045013.
- Ali H Nayfeh, Hassen M Ouakad, Fehmi Najar, Slim Choura, Eihab Abdel-Rahman, “Nonlinear dynamics of a resonant gas sensor,” nonlinear. dynamics., doi:10.1007/s11071-009-9567-z, 2009.
- Hassen M Ouakad, Mohammad I Younis "Modeling and simulations of collapse instabilities of microbeams due to capillary forces", Mathematical Problems in Engineering, in presss, 2009.
- Hassen M Ouakad, Mohammad I Younis, “Nonlinear dynamics of carbon nanotube resonators,” Accepted for publication in the ASME journal of computational and nonlinear dynamics.
Conferences and workshops:
- M. I. Younis, and H. M. Ouakad, "The Static and Dynamic Behavior of MEMS Arches Uuder Electrostatic Actuation", Proceeding of IEEE, 6th International Symposium on Mechatronics and its Applications (ISMA09), Sharjah, UAE, March 24-26, 2009
- H. M. Ouakad, and M I. Younis, “Modeling and simulations of collapse instabilities of microbeams due to capillary forces”, submitted for publication and presentation at the ASME IMECE2008, Boston, MA, November 2008.
- F. M. Alsaleem, M. I. Younis, and H. M. Ouakad, “Experimental and Theoretical Investigation of the Nonlinear Dynamics of an electrostatically-actuated device”, submitted for publication and presentation at the ASME IMECE2008, Boston, MA, November 2008.
- H. M. Ouakad, and M I. Younis, “Nonlinear Dynamics of Electrically-Actuated Carbon Nanotube Resonator”, submitted for publication and presentation at the ASME IMECE2008, Boston, MA, November 2008.
- H. M. Ouakad, A. H. Nayfeh, S. Choura, E. M. Abdel-Rahman, F. Najar, and B. Hamad, “Feedback control and nonlinear dynamics of microbeams resonator”, submitted for publication and presentation at the ASME IMECE2008, Boston, MA, November 2008.
- H. M. Ouakad, H. N. Arafat, and M. I. Younis, “The response of a cantilever microbeam with a plate attached to its tip to mechanical shock” accepted for publication and presentation at the ICCSSS IASS-IACM 2008, Cornell University, Ithaca, NY, May 2008.
- H. M. Ouakad, and M. I. Younis, “Modelling and simulation of a cantilever-paddle beam under the effect of capillary, shock, and electrostatic forces”, accepted for publication and presentation at the ASME IDETC2008, New-York City, NY, August 2008.
- Participation in the US-Tunisia Workshop : "Research and Educational Advances in Design and Fabrication of Microelectromechanical Systems", December 14-16, 2006 at Hammamet Tunisia.
- Participation in "The third International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM 2006", December 17-19, 2006 at Hammamet, Tunisia.
- Fadi M Alsaleem, Mohammad I Younis, and Hassen M Ouakd, "On the nonlinear resonances and dynamic pull-in of electrostatically actuated resonators" J. Micromech. Microeng. 19 (2009) 045013 doi:10.1088/0960-1317/19/4/045013.
- Ali H Nayfeh, Hassen M Ouakad, Fehmi Najar, Slim Choura, Eihab Abdel-Rahman, “Nonlinear dynamics of a resonant gas sensor,” nonlinear. dynamics., doi:10.1007/s11071-009-9567-z, 2009.
- Hassen M Ouakad, Mohammad I Younis "Modeling and simulations of collapse instabilities of microbeams due to capillary forces", Mathematical Problems in Engineering, in presss, 2009.
- Hassen M Ouakad, Mohammad I Younis, “Nonlinear dynamics of carbon nanotube resonators,” Accepted for publication in the ASME journal of computational and nonlinear dynamics.
Conferences and workshops:
- M. I. Younis, and H. M. Ouakad, "The Static and Dynamic Behavior of MEMS Arches Uuder Electrostatic Actuation", Proceeding of IEEE, 6th International Symposium on Mechatronics and its Applications (ISMA09), Sharjah, UAE, March 24-26, 2009
- H. M. Ouakad, and M I. Younis, “Modeling and simulations of collapse instabilities of microbeams due to capillary forces”, submitted for publication and presentation at the ASME IMECE2008, Boston, MA, November 2008.
- F. M. Alsaleem, M. I. Younis, and H. M. Ouakad, “Experimental and Theoretical Investigation of the Nonlinear Dynamics of an electrostatically-actuated device”, submitted for publication and presentation at the ASME IMECE2008, Boston, MA, November 2008.
- H. M. Ouakad, and M I. Younis, “Nonlinear Dynamics of Electrically-Actuated Carbon Nanotube Resonator”, submitted for publication and presentation at the ASME IMECE2008, Boston, MA, November 2008.
- H. M. Ouakad, A. H. Nayfeh, S. Choura, E. M. Abdel-Rahman, F. Najar, and B. Hamad, “Feedback control and nonlinear dynamics of microbeams resonator”, submitted for publication and presentation at the ASME IMECE2008, Boston, MA, November 2008.
- H. M. Ouakad, H. N. Arafat, and M. I. Younis, “The response of a cantilever microbeam with a plate attached to its tip to mechanical shock” accepted for publication and presentation at the ICCSSS IASS-IACM 2008, Cornell University, Ithaca, NY, May 2008.
- H. M. Ouakad, and M. I. Younis, “Modelling and simulation of a cantilever-paddle beam under the effect of capillary, shock, and electrostatic forces”, accepted for publication and presentation at the ASME IDETC2008, New-York City, NY, August 2008.
- Participation in the US-Tunisia Workshop : "Research and Educational Advances in Design and Fabrication of Microelectromechanical Systems", December 14-16, 2006 at Hammamet Tunisia.
- Participation in "The third International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM 2006", December 17-19, 2006 at Hammamet, Tunisia.
Tuesday, July 01, 2008
In the Innovative Technologies Complex lab (Binghamton University) --> The Micro Structure Analyser (MSA Analyser)
The MSA Analyser
The MSA Analyser
The microbeams under study
Thursday, May 29, 2008
ICCSSS IASS-IACM 2008 Conference, Cornell University, Ithaca, NY, May 2008.
Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures
IASS-IACM 2008: “Spanning Nano to Mega” 28-31 May 2008, Cornell University, Ithaca, NY, USA :
Presented work:
H. M. Ouakad, H. N. Arafat, M. I. Younis, “The response of a cantilever microbeam with a plate attached to its tip to mechanical shock” accepted for publication and presentation at the ICCSSS IASS-IACM 2008, Cornell University, Ithaca, NY, May 2008.
Photo (from the left to the right):
Mr. Hassen Ouakad (me, SUNY Binghamton University), Pr. Nicolae Lobontiu (Keynote Lecture, University of Alaska), Pr. Alan Zhender (Nano and Micro-scale Structure Session Orginazer & Chair, Cornell University), Pr. Slava Krylov (Nano and Micro-scale Structure Session Orginazer & Chair, Tel Aviv University), and Pr. Mohammad Younis (my advisor, SUNY Binghamton University).
IASS-IACM 2008: “Spanning Nano to Mega” 28-31 May 2008, Cornell University, Ithaca, NY, USA :
Presented work:
H. M. Ouakad, H. N. Arafat, M. I. Younis, “The response of a cantilever microbeam with a plate attached to its tip to mechanical shock” accepted for publication and presentation at the ICCSSS IASS-IACM 2008, Cornell University, Ithaca, NY, May 2008.
Photo (from the left to the right):
Mr. Hassen Ouakad (me, SUNY Binghamton University), Pr. Nicolae Lobontiu (Keynote Lecture, University of Alaska), Pr. Alan Zhender (Nano and Micro-scale Structure Session Orginazer & Chair, Cornell University), Pr. Slava Krylov (Nano and Micro-scale Structure Session Orginazer & Chair, Tel Aviv University), and Pr. Mohammad Younis (my advisor, SUNY Binghamton University).
Tuesday, March 18, 2008
Graduate Research Day, Binghamton University, March 18th 2008
These are some photos taken on March 18th 2008 at the Graduate Research Day that had been held on Binghamton University (Old Union).
Tuesday, November 27, 2007
Participation on the Scientific Research and Technological Innovation days in Tunisia (19th-20th November 2007) - El Kram, Tunis, 2007
Scientific Research and Technological Innovation in Tunisia : The project of a nation:
Under the High Patronage of President Zine El Abidine Ben Ali, the Ministry of Higher Education, Scientific Research and Technology organises the National Scientific Research and Technological Innovation Consultation Days, on the 19th and 20th ofNovember, 2007at El Kram International Fair.., Click here to Download the poster in PDF format.
Under the High Patronage of President Zine El Abidine Ben Ali, the Ministry of Higher Education, Scientific Research and Technology organises the National Scientific Research and Technological Innovation Consultation Days, on the 19th and 20th ofNovember, 2007at El Kram International Fair.., Click here to Download the poster in PDF format.
Monday, August 20, 2007
Mes Prix de majeur de Promotion à l'EPT et Master de Mécanique Calculatoire à l'EPT - Price of top student in Computational mechanics master ' Program
Prix de majeur de promotion dans le master de mécanique calculatoire avec félicitation:Dans la photo, de gauche à droite:
- Mr Houcine Chebli : Directeur de l'université virtuelle de Tunis;
- Mr Jmaïl Ben Ibrahim : Recteur de l'Université 7 Novembre Carthage;
- Mr Ridha Ben Mosbah : Secrétaire d'Etat au prés du ministre de l'enseignement supérieur et
des technologies.
- Mr Hbib Maagli : Directeur de l'Ecole Polytechnique de Tunisie;
- Mr Manef Abd Rabbou : Directeur de Borj Cedria Science and Technology Park;
- Mr Héchmi Saïd : Directeur de Institut Préparatoire aux études scientifiques et
techniques.
_______________________________________________________________
Price of top student in the Computational mechanics master ' Program with congratulation :
In the photo, from the left to the right:
- Mr. Houcine Chebli: Director of the virtual university of Tunis;
- Mr. Jmaïl Ben Ibrahim: Vice-chancellor of the University November 7 Carthage;
- Mr. Ridha Ben Mosbah: State Secretary of the meadows of the Minister for the higher education and technologies.
- Mr. Hbib Maagli: Director of the Tunisia Polytechnic School;
- Mr. Manef Abd Rabbou: Director of Borj Cedria Science and Technology Park;
- Mr. Héchmi Said: Director of scientific studies and techniques Preparatory Institute.
_______________________________________________________________
These are the four prices that I earned from the Tunisia Polytechnic School :
- Second Price of the third year at the Tunisia Polytechnic School;
- Price of the Top student of the promotion (2004-2007);
- Price of the Top student at the Computational Mechanics Master Program;
- Price of the best graduation project.
____________________________________________________________
____________________________________________________________
- Deuxiéme Prix de la 3émé année # Prix de meilleur Projet de Fin d'études
- Second Price in the 3rd Year # Price of the Best Graduation Project
- Prix de majeur de la promotion EPT 2007 # Prix de majeur au Master CMMP
- Price of the Top Student promotion TPS 2007 # Price of Top Student Master CMMP
- Reception du diplôme d'ingénieur polytechnicien
- Reception of the diploma for the occupation of general-purpose engineer
Monday, March 20, 2006
Obtention du diplôme d'ingénieur polytechnicien de l'Ecole Polytechnique de Tunisie-Obtaining the Diploma of Main Engineer from Polytechnic School TN
La c'est le moment le plus important et émouvant lors de mon passage à l'Ecole Polytechnique de Tunisie, c'est le moment ou je viens d'avoir mon diplôme d'ingénieur Polytechnicien.
It is the moment most important and moving at the time of my passage to the Polytechnic School of Tunisia, it is the moment in which I just had my diploma for the occupation of the main engineer from Tunisia Polytechnic School.
My Profile Presentation
I am a engineer graduated from the Tunisia Polytechnic School (promotion 2007) . It is a school which trains general-purpose engineers able to assume responsibilities as well scientific and technical as human and relational. Web Page : http://en.wikipedia.org/wiki/Tunisia_Polytechnic_School
Hence, my profile corresponds perfectly to the requirements of an engineer in mechanics. Indeed, as a future main engineer, I will be able to conceive, analyze and manage complex systems thanks to a very varied of fundamental sciences, in particular data processing, electronics, telecommunications, advanced vibration, modeling of MEMS and NEMS, nonlinear dynamics, linear and nonlinear control theory, stength of material...etc...
OUAKAD Hassen
Graduated From Tunisia Polytechnic school (Mechanics Department): Web-Page : http://www.ept.rnu.tn/
Currently I am in a RA position as a PhD student in Binghamton University. I got my MS degree at Tunisia Polytechnic School called Computational mechanics master's program: --> Web-page: http://www.esm.vt.edu/~anayfeh/cmgp-tps/
--> Here is my CV: http://ouakad_hassen.netcv.org/
Hence, my profile corresponds perfectly to the requirements of an engineer in mechanics. Indeed, as a future main engineer, I will be able to conceive, analyze and manage complex systems thanks to a very varied of fundamental sciences, in particular data processing, electronics, telecommunications, advanced vibration, modeling of MEMS and NEMS, nonlinear dynamics, linear and nonlinear control theory, stength of material...etc...
OUAKAD Hassen
Graduated From Tunisia Polytechnic school (Mechanics Department): Web-Page : http://www.ept.rnu.tn/
Currently I am in a RA position as a PhD student in Binghamton University. I got my MS degree at Tunisia Polytechnic School called Computational mechanics master's program: --> Web-page: http://www.esm.vt.edu/~anayfeh/cmgp-tps/
--> Here is my CV: http://ouakad_hassen.netcv.org/
